Filter
Top Products
22 - 60
22. FA TRANSPARENT FUNCTION
22.6 Personal Computer Side Setting
22.6.11 Accessing by FX Configurator-
EN
This section explains the procedure to set the FA
transparent function of the FX Configurator-EN.
1. Click [Transfer setup] on the FX Configurator-EN.
2. Mark the [Serial port/USB] checkbox in [Connecting
interface].
3. Check-mark either of the following in [Serial port/
USB] of [Connecting interface].
Mark the [RS-232C (include FX-USB-AW/FX3U-USB-
BD)] checkbox.
Mark the [USB (GOT Transparent mode)] checkbox.
4. Click [Connection test]
When connecting the GOT and PC with serial
When connecting the GOT and PC with USB
5. After the communication test is completed, check that
the GOT is correctly connected to the FXCPU.