Filter
Top Products
21. MULTI-CHANNEL FUNCTION
21.3 GOT Side Settings
21 - 33
17
ROBOT
CONTROLLER
CONNECTION
18
CNC CONNECTION
19
GOT MULTI-DROP
CONNECTION
20
MULTIPLE-GT14, GT12,
GT11, GT10
CONNECTION FUNCTION
21
MULTI-CHANNEL
FUNCTION
22
FA TRANSPARENT
FUNCTION
21.5
Multi-channel Function
Check Sheet
Write down the following items to the check sheet.
Attaching the communication unit
1. Write down the name of communication unit to be used for each of the
connection type.
* For the GT155 , setting is made only for Extension interface 1.
When GT15-QBUS2/ABUS2 is used, although GT15-RS2-9P is installed physically at the
2nd stage of extend interface 2, the GOT recognizes the position as the 1st stage.
Therefore, in the check sheet, the position should be entered as 1st stage.
2. After writing down the names of communication units, write down CH
No. to be assigned to respective units based on the entry in ■ Check
Sheet No. 1 (selection of connection type and interface).
(Continued to next page)
Write Check
Sheet