Filter
Top Products
7. COMPUTER LINK CONNECTION
7.1 Connectable Model List
7 - 3
1
PREPARATORY
PROCEDURES FOR
MONITORING
2
DEVICE RANGE
THAT CAN BE SET
3
ACCESS RANGE
FOR MONITORING
4
HOW TO MONITOR
REDUNTANT
SYSTEM
5
BUS CONNECTION
6
DIRECT
CONNECTION TO
CPU
7
COMPUTER LINK
CONNECTION
8
ETHERNET
CONNECTION
(Continued to next page)
*1 Use only modules with the upper five digits of the serial No. later than 12042.
*2 Use the serial port of a serial communication module controlled by another CPU on the multiple CPU.
*3 If the A series computer link module is applied to the QnACPU, the GOT can monitor the devices in the same range on AnACPU.
However, the following devices cannot be monitored.
• Devices added to QnACPU
• Latch relays (L) and step relays (S)
(In case of QnACPU, the latch relay (L) and step relay (S) are different from the internal relay. However, whichever is specified,
an access is made to the internal relay.)
• File register (R)
Series Model name Clock
Communication
Refer to
C Controller
module
Q12DCCPU-V
*1*2
RS-232
RS-422
7.2.1
Q24DHCCPU-V
*2
MELSEC-QS QS001CPU - -
MELSEC-L
L02CPU
RS-232
RS-422
7.2.2
L26CPU
L26CPU-BT
L02CPU-P
L26CPU-PBT
L02SCPU
MELSEC-Q
(A mode)
Q02CPU-A
RS-232
RS-422
7.2.3
Q02HCPU-A
Q06HCPU-A
MELSEC-QnA
(QnACPU)
*3
Q2ACPU
RS-232
RS-422
7.2.4
Q2ACPU-S1
Q3ACPU
Q4ACPU
Q4ARCPU
RS-232
RS-422
MELSEC-QnA
(QnASCPU)
*3
Q2ASCPU
RS-232
RS-422
7.2.5
Q2ASCPU-S1
Q2ASHCPU
Q2ASHCPU-S1
MELSEC-A
(AnCPU)
A2UCPU
RS-232
RS-422
7.2.6
A2UCPU-S1
A3UCPU
A4UCPU
A2ACPU
A2ACPUP21
A2ACPUR21
A2ACPU-S1
A2ACPUP21-S1
A2ACPUR21-S1
A3ACPU
A3ACPUP21
A3ACPUR21
A1NCPU
A1NCPUP21
A1NCPUR21
A2NCPU
A2NCPUP21
A2NCPUR21
A2NCPU-S1
A2NCPUP21-S1
A2NCPUR21-S1
A3NCPU
A3NCPUP21
A3NCPUR21