Filter
Top Products
1 - 40
1. PREPARATORY PROCEDURES FOR MONITORING
1.6 Checking for Normal Monitoring
Perform an I/O check
Whether the PLC can communicate with the GOT or not can be checked by the I/O check function.
If this check ends successfully, it means correct communication interface settings and proper cable connection.
Display the I/O check screen by Main Menu.
• For GT16, GT12
Display the I/O check screen by [Main menu] [Self check] [I/O check].
• For GT15, GT14, GT11
Display the I/O check screen by [Main menu] [Debug & self check] [Self check] [I/O check].
For details on the I/O check, refer to the following manual:
GT User's Manual
1.
Touch [CPU] on the I/O check screen.
Touching [
CPU
] executes the communication
check with the connected PLC.
2. When the communication screen ends
successfully, the screen on the left is displayed.
1.