Filter
Top Products
2. DEVICE RANGE THAT CAN BE SET
2.4 MELSEC-Q (Multi)/Q Motion
2 - 11
1
PREPARATORY
PROCEDURES FOR
MONITORING
2
DEVICE RANGE
THAT CAN BE SET
3
ACCESS RANGE
FOR MONITORING
4
HOW TO MONITOR
REDUNTANT
SYSTEM
5
BUS CONNECTION
6
DIRECT
CONNECTION TO
CPU
7
COMPUTER LINK
CONNECTION
8
ETHERNET
CONNECTION
2.4 MELSEC-Q (Multi)/Q Motion
The device ranges that can be set when selecting
[MELSEC-Q (Multi)/Q Motion]
*13
as the controller type are
as follows.
(When using the QCPU)
* For details of *1 to *6, refer to 2.3 MELSEC-QnA/Q/QS,
MELDAS C6 *.
*7 This is not supported by GT10.
*8 This cannot be monitored when in GOT multi-drop
connection.
(When using the Q Motion)
*9 When setting special internal relay M9000 to M9255, use SM
for the device name and set the value subtracted 9000 for
the device number (0 to 255).
*10 The setting range is D9000 to D9255 when setting the
special data register.
*11 D8192 to D8999 and D9256 to D9999 are out of the valid
setting range.
(When using the QCPU/Q Motion)
*12 Do not use local devices set in the MELSEC-Q (Multi)/Q
Motion system.
Otherwise, normal monitoring is not performed.
*13 For GT10, the controller type is [MELSEC-Q(Multi)].
Device name Setting range
Device No.
representation
Bit device
Input (X) X0 to X1FFF
Hexadecimal
Output (Y) Y0 to Y1FFF
Internal relay (M)
*12
M0 to M32767
Decimal
Latch relay (L) L0 to L32767
Annunciator (F) F0 to F32767
Link relay (B) B0 to B7FFF
Hexadecimal
Timer
*12
Contact (TT) TT0 to TT32767
Decimal
Coil (TC) TC0 to TC32767
Counter
*12
Contact (CT) CT0 to CT32767
Coil (CC) CC0 to CC32767
Special relay (SM)
*9
SM0 to SM2047
Retentive
timer
*12
Contact (SS) SS0 to SS32767
Coil (SC) SC0 to SC32767
Step relay (S) S0 to S32767
Link special relay (SB) SB0 to SB7FF
Hexadecimal
Word device bit
Specified bit of the
following word devices
(Except Timer, Counter,
Retentive timer, Index
register and Buffer
memory)
―
Word device
Data register (D)
*10*11*12
D0 to D32767
Decimal
Special data register (SD) SD0 to SD2047
Link register (W) W0 to W7FFF
Hexadecimal
Timer (current value) (TN)
*12
TN0 to TN32767
Decimal
Counter (current value)
(CN)
*12
CN0 to CN32767
Retentive timer
(current value) (SN)
*12
SN0 to SN32767
Link special register (SW) SW0 to SW7FF
Hexadecimal
File register (R)
*1*2
R0 to R32767
Decimal
Extension
file register
(ER)
*1*7*8
Block 0 to 255
Device R0 to R32767
Extension file register
(ZR)
*1*3*4*7*8
ZR0 to
ZR1042431
Index register (Z) Z0 to Z15
Buffer memory
(Intelligent function module)
(BM)
*5*7*8
BM0 to BM32767
Buffer memory
(Intelligent function module)
(G)
*4*5*7*8
G0 to G65535
Ww
*7*8
Ww0 to Ww7FF
Hexadecimal
Wr
*7*8
Wr0 to Wr7FF
Motion device (#)
*7*8
#0 to #8191 Decimal
Bit device word
*6*7
Converting the above bit
devices into words
(Except Timer, Counter
and Retentive timer)
―