Filter
Top Products
22 - 2
22. FA TRANSPARENT FUNCTION
22.1 FA Transparent Function
22. FA TRANSPARENT FUNCTION
22.1 FA Transparent Function
The FA transparent function allows the sequence programs of the Mitsubishi PLC to be read, written and monitored from
a personal computer connected via a GOT.
22.2 Compatible Software
The following shows the software compatible with the FA transparent function.
POINTPOINTPOINT
(1) The range accessible by software when FA transparent function is used
Use of the FA transparent function does not affect the range accessible by the software.
For details on accessible range, refer to the manual for the respective software.
(2) The software settings when using FA transparent function
For the software settings, refer to the following when using FA transparent function.
22.6.1 Accessing the PLC by the GX Developer, PX Developer, GX Configurator
22.6.2 Accessing by GX Works2
22.6.3 Accessing by GX LogViewer
22.6.4 Accessing PLC by GX Configurator-QP
22.6.5 Accessing by the MT Developer
22.6.6 Accessing by the MT Works2
22.6.7 Accessing the servo amplifier by the MR Configurator
22.6.8 Accessing the servo amplifier by the MR Configurator2
22.6.9 Accessing the inverter by the FR Configurator
22.6.10 Accessing PLC by FX Configurator-FP
22.6.11 Accessing by FX Configurator-EN
22.6.12 Accessing by RT ToolBox2
22.6.13 Accessing by NC Configurator
22.6.14 Accessing by MELSOFT Navigator
22.6.15 Accessing by LCPU Logging Configuration Tool
22.6.16 Accessing by Setting/ Monitoring tool for C Controller module
Sequence program can be read, written, monitored, etc.
Bus connection cable
RS-232/RS-422 cable
Ethernet connection cable
RS-232 cable
USB cable
Ethernet connection cable
A 1254
348B
A 1254
348B