Filter
Top Products
DMP Checklist - New HP-UX Server and New Storage System
2-49
HP-UX Installation Checklist
6Server
Install Host
Agent
❑
Install the Navisphere Host Agent. CX-Series Server
Software for HP-UX
Installation Guide
❑
Modify user login scripts.
❑
Edit the Navisphere Host Agent configuration file (agent.config) as follows:
• Add the following entry if it does not already exist:
device auto auto
• Add at least one privileged user.
❑
Verify that the Navisphere Host Agent configuration file (agent.config) has
the following entry commented out:
# Options Supported Autotrespass
(leading # is present)
The above entry will set the initiator type for the HBAs to auto trespass
when Host Agent is restarted later in this procedure.
❑
Continue to edit other entries in the Navisphere Host Agent configuration
file (agent.config) as desired.
❑
Restart the Host Agent to register the HBAs with the storage system.
7Storage System
Set up security
❑
Use Navisphere Manager to define a global administrator and domain (if
not already defined) and any additional users.
Navisphere security
administrator’s guide
and Navisphere
Manager online help
8Storage System
Set properties
❑
Use the following Navisphere CLI commands to set the default failover
mode and array commpath properties with the following commands:
navicli -h
hostname
failovermode 2
navicli -h
hostname
arraycommpath 1
where
hostname
is the IP address or network name of an SP in the storage
system.
Navisphere CLI
reference
9Storage System
Configure
❑
Use Navisphere Manager to set general storage-system properties. Navisphere Manager
administrator’s guide
and online help
❑
Use Navisphere Manager to create RAID Groups, bind LUNs, create
Storage Groups, and assign LUNs to Storage Groups.
❑
Use Navisphere Manager to connect the host initiators to Storage Groups.
Task
With Access Logix Reference Document