Filter
Top Products
DMP Checklist - New Solaris Server and New Storage System
5-49
Solaris Installation Checklists
7Storage System
Set
arraycommpath
mode
❑
Use the following Navisphere CLI command to set the default
storage-system arraycommpath property with the following command:
navicli -h
sp
arraycommpath 1
where
sp
is the IP address or network name of the SP in the storage
system.
Navisphere CLI reference
8Switch
Connect servers
and SPs
❑
Verify that the servers and SPs are connected to the switch Documentation that ships
with the switches
9Switch
Zone switches
For a SAN
❑
Zone switches.
This provides a path from the host initiator to the SP.
You will need to know the WWPN of the host initiators - available in the
switch’s name server table.
Documentation that ships
with the switches
❑
Reboot the server using the reboot -- -r command to load the drivers and
perform a login of the host initiators and SPs to the fabric ports on the
switch.
❑
Checkpoint - Use switch management software to verify that the HBAs
and storage systems are logged in to the switch as fabric ports, and to
verify that each HBA sees only the targets (SPs) to which it is zoned.
10 Server
Add persistent
bindings
❑
Add persistent bindings to the HBA driver configuration file. Solaris utilities
administrator guide
11 Storage System
Verify host
initiators are
registered
❑
Before you connect the server to a Storage Group, use the Connectivity
Status dialog in Navisphere Manager to verify that the host initiators are
registered.
Navisphere Manager
administrator’s guide and
online help
12 Storage System
Connect host
initiators to
Storage Groups
❑
Use Navisphere Manager to connect servers to Storage Groups Navisphere Manager
administrator’s guide and
online help
❑
Reboot the server using the reboot -- -r command so that Solaris
recognizes the LUNs.
Now the LUNs in the Storage Group look like any other disks in the
server.
❑
Checkpoint - Use the format command to verify that the operating
system sees all the LUNs and label any new LUNs.
Task
With Access Logix Reference Document