Filter
Top Products
PowerPath Checklist — Existing Windows Server and New Storage System
7-39
Windows Installation Checklists
5 Server
Install PowerPath
❑
Install PowerPath. PowerPath release
notes and PowerPath for
Windows installation
and administrator’s
guide
❑
Reboot the server to complete the installation of PowerPath.
Contrary to what the PowerPath documentation states, PowerPath will not
see any logical disks (LUNs) in the storage system at this point because
the storage system has not been connected.
❑
Install any PowerPath patches from the Software downloads page on the
EMC Powerlink website:
http://powerlink.emc.com
6 Storage System
Install
❑
Install the storage system in the cabinet, if not already installed. Rails and cabinet
documentation
7 Storage System
Cable
management
ports
❑
Cable the storage-system management port on each SP to the network
from which you will management the storage system.
Storage-system setup
guide
8 Storage System
Initialize and
install software
enablers
❑
Install the Navisphere Initialization Utility on a host on the
same subnet
as
the storage-system management ports.
Storage-system setup
guide
❑
Use the Navisphere Initialization Utility to initialize the storage system.
❑
If you have SAN Copy, SnapView, MirrorView, and/or MirrorView/A
software, install their enablers.
For a CX300, CX500, or CX700 storage system, continue to step 10.
For a CX500i storage system, go to step 11.
Navisphere Manager
administrator’s guide
and online help
Task
With Access Logix Reference Document