Filter
Top Products
PowerPath Checklist — New Solaris Server and Existing Storage System
5-15
Solaris Installation Checklists
3 Server
Install PowerPat
h
❑
Install PowerPath.
❑
Install PowerPath. PowerPath release
notes and PowerPath
for UNIX installation
and administrator’s
guide
❑
If you have a PowerPath license
key, register it.
❑
If you have a PowerPath license
key, register it
❑
Reboot the server to complete
the installation of PowerPath.
❑
Reboot the server to complete
the installation of PowerPath.
❑
Install any PowerPath patches
from the Software downloads
page on the EMC Powerlink
website:
http://powerlink.emc.com
❑
Install any PowerPath patches
from the Software downloads
page on the EMC Powerlink
website:
http://powerlink.emc.com
4 Server
Install Host
Agent or Server
Utility
❑
Install the Navisphere Host Agent
or Navisphere Server Utility and
the Navisphere CLI.
❑
Install the Navisphere Host Agent
or Navisphere Server Utility and
the Navisphere CLI.
CX-Series Server
Software for Solaris
Installation Guide
5 Server
Install admsnap
❑
If the server will be a SnapView
production or secondary host,
install the admsnap utility.
N/A
6Storage System
Update software
❑
If currently installed
storage-system software is not at
the required minimum revision,
update it.
CAUTION During the software
update, hosts connected to the
storage system will lose access to
data if they do not have failover
software or if all paths to an SP
are down.
❑
If currently installed
storage-system software is not at
the required minimum revision,
update it.
CAUTION During the software
update, hosts connected to the
storage system will lose access to
data if they do not have failover
software or if all paths to an SP
are down.
Navisphere Manager
administrator’s guide
and online help
Task
With Access Logix Without Access Logix Reference Document