Filter
Top Products
PowerPath Checklist — New AIX Server and Existing Storage System
1-19
AIX Installation Checklists
14 Server
Configure
devices
❑
Execute the following command:
emc_cfgmgr.sh
❑
Execute the following command:
emc_cfgmgr.sh
AIX documentation
❑
Execute the following PowerPath
command:
powermt config
❑
Execute the following PowerPath
command:
powermt config
PowerPath product
guide
❑
Checkpoint - Verify that the
servers see hdisk devices for the
LUNs.
❑
Checkpoint - Verify that the
servers see hdisk devices for the
LUNs.
AIX documentation
❑
Checkpoint - Verify that
PowerPath sees all the paths to
the LUNs with the following
PowerPath command:
powermt display dev=all
class=clariion
If PowerPath does not see the
LUNs
• Verify the server’s connection
to the Storage Group.
• Verify that you registered your
PowerPath license key if you
have one.
• Verify that the storage-system
properties are as defined in
step 8.
❑
Checkpoint - Verify that
PowerPath sees all the paths to
the LUNs with the following
PowerPath command:
powermt display dev=all
class=clariion
If PowerPath does not see the
LUNs
• Verify that you registered your
PowerPath license key if you
have one.
• Verify that the storage-system
properties are as defined in
step 8.
PowerPath product
guide
❑
Restart the Navisphere Host
Agent or run the Navisphere
Server Utility with the following
AIX commands:
Host Agent
/
etc/rc.agent stop
/etc/rc.agent start
Server Utility
/usr/lpp/HOSTUTIL/naviserverutil
❑
Restart the Navisphere Host
Agent or run the Navisphere
Server Utility with the following
AIX commands:
Host Agent
/
etc/rc.agent stop
/etc/rc.agent start
Server Utility
/usr/lpp/HOSTUTIL/naviserverutil
CX-Series Server
Software for AIX
Installation Guide
❑
Checkpoint if the Host Agent is
installed - Use Navisphere
Manager to verify that the LUNs
are mapped to hdiskpower
devices.
❑
Checkpoint if the Host Agent is
installed - Use Navisphere
Manager to verify that the LUNs
are mapped to hdiskpower
devices.
Navisphere Manager
administrator’s guide
and online help
Task
With Access Logix Without Access Logix Reference Document