PowerPath Checklist — New Windows Server and Existing Storage System With Boot Disk
7-33
Windows Installation Checklists
16 Server (direct
attach only)
Cable additional
paths
❑
For a direct attach configuration,
cable any additional HBA ports to
SP ports.
❑
For a direct attach configuration,
cable any additional HBA ports to
SP ports.
Storage-system setup
guide
❑
Checkpoint - Use one of the
following ways to verify that
PowerPath sees all the paths to
the LUNs:
• PowerPath Administrator
(Start > Programs
>
EMC >
PowerPath Administrator)
• PowerPath command
powermt display dev=all
class=clariion
If PowerPath does not see the
LUNs
• Verify the server’s connection
to the Storage Group.
• Verify that you registered your
PowerPath license key if you
have one.
• Verify that the storage-system
properties are as defined in
step 13.
❑
Checkpoint - Use one of the
following ways to verify that
PowerPath sees all the paths to
the LUNs:
• PowerPath Administrator
(Start > Programs
>
EMC >
PowerPath Administrator)
• PowerPath command
powermt display dev=all
class=clariion
If PowerPath does not see the
LUNs
• Verify that you registered your
PowerPath license key if you
have one.
• Verify that the storage-system
properties are as defined in
step 13.
PowerPath product
guide
For an FC4500 storage system
❑
Disconnect the computer from
the serial port on the storage
system.
For an FC4500 storage system
❑
Disconnect the computer from
the serial port on the storage
system.
Storage-system setup
guide
17 Server
Install Host
Agent or Server
Utility
❑
Install the Navisphere Host Agent
or Navisphere Server Utility and
the Navisphere CLI.
❑
Install the Navisphere Host Agent
or Server Utility and the
Navisphere CLI.
CX-Series Server
Software for Windows
installation guide or
Navisphere Host Agent
and CLI for Windows
installation guide
18 Server With a
CX500i Storage
System
Configure server
iSCSI HBA
initiator ports
❑
Download and install QLogic
SANsurfer.
N/A Storage-system setup
guide
❑
Use QLogic SANsurfer to
configure the network parameters
for each or for each HBA.
Task
With Access Logix Without Access Logix Reference Document