7-32
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
Windows Installation Checklists
15 Fibre Channel
Switches
Zone
additional
paths (cont.)
❑
Checkpoint - Use one of the
following ways to verify that
PowerPath sees all the paths to
the LUNs:
• PowerPath Administrator
(Start > Programs
>
EMC >
PowerPath Administrator)
• PowerPath command
powermt display dev=all
class=clariion
If PowerPath does not see the
LUNs
• Verify the server’s connection
to the Storage Group.
• Verify that you registered your
PowerPath license key if you
have one.
• Verify that the storage-system
properties are as defined in
step 13.
❑
Checkpoint - Use one of the
following ways to verify that
PowerPath sees all the paths to
the LUNs:
• PowerPath Administrator
(Start > Programs
>
EMC >
PowerPath Administrator)
• PowerPath command
powermt display dev=all
class=clariion
If PowerPath does not see the
LUNs
• Verify that you registered your
PowerPath license key if you
have one.
• Verify that the storage-system
properties are as defined in
step 13.
PowerPath product
guide
For an FC4500 storage system
❑
Disconnect the computer from
the serial port on the storage
system.
For an FC4500 storage system
❑
Disconnect the computer from
the serial port on the storage
system.
Storage-system setup
guide
Task
With Access Logix Without Access Logix Reference Document