Filter
Top Products
PowerPath Checklist — New Linux Server and Existing Storage System
3-15
Linux Installation Checklist
7Switches
Zone
For a SAN
❑
Zone the switches to provide a
path from each additional HBA
port (host initiator) to the SPs.
For a SAN
❑
Zone the switches to provide a
path from each additional HBA
port (host initiator) to the SPs.
Switch management
documentation
❑
Checkpoint - Use switch
management software to verify
the switch connections to the
storage system.
❑
Checkpoint - Use switch
management software to verify
the switch connections to the
storage system.
8Server
Register HBAs
❑
Restart the Navisphere Host
Agent or run the Navisphere
Server Utility.
N/A CX-Series Server
Software for Linux
Installation Guide.
❑
To make LUNZs visible to the
HBAs, either reload the HBA
driver or reboot the server.
❑
To make LUNZs visible to the
HBAs, either reload the HBA
driver or reboot the server.
Linux documentation
❑
Checkpoint - Use Navisphere
Manager’s Connectivity Status
dialog box to verify that each HBA
is registered with the storage
system.
For an FC4500 storage system, go to
step 10.
For an FC4500 storage system, go to
step 10.
Navisphere Manager
administrator’s guide
and online help
Task
With Access Logix Without Access Logix Reference Document