Filter
Top Products
DMP Checklist - New Solaris Server and New Storage System
5-51
Solaris Installation Checklists
18 Server
Verify DMP
installation
(cont.)
❑
Click the paths tab for that device. VERITAS Volume
Manager documentation
❑
Verify that the device has primary and secondary paths to it.
❑
Verify the state of the device (enabled or disabled).
For a VxVM version less than 3.5
❑
Log into Volume Manager Storage Administrator (VMSA)
❑
Double-click a disk icon.
❑
In the list of disks, double-click a disk you know belongs to the CLARiiON
storage system.
❑
Click the disks tab to verify there are the expected number of Primary
and Secondary paths.
❑
Verify that it displays the correct number of paths with
vxdisk list
device
where
device
is the name of the disk you selected.
19 Server
Verify DMP
Operation
❑
Start I/O to the VERITAS Volume. VERITAS Volume
Manager documentation
❑
Identify the CLARiiON devices under the Volume with
vxprint -v
❑
Choose one of the CLARiiON devices and determine all its paths with
vxdisk list
device
or
vxdmpadm getsubpaths
dmpnodename=
device
where
device
is the name of the CLARiiON device
Task
With Access Logix Reference Document