PowerPath Checklist - Existing HP-UX Server and Existing Storage System
2-39
HP-UX Installation Checklist
8 FC4500 Storage
System
Set properties for
PowerPath
(cont.)
From a serially connected laptop
❑
Use the following Navisphere CLI
commands to set the following
default storage-system properties:
navicli -np -d
device
failovermode 1
navicli -np -d
device
arraycommpath 1
where
device
is the name of the
computer port connected to the
storage-system serial port (for
example, com1).
Storage-system setup
guide and Navisphere
CLI reference
9Server
Install PowerPath
❑
Insert the PowerPath installation
CD and mount it.
❑
Insert the PowerPath installation
CD and mount it.
PowerPath Release
Notes and PowerPath
for UNIX installation
and administrator’s
guide
❑
Install PowerPath.
❑
Install PowerPath.
❑
Register PowerPath.
❑
Register PowerPath.
❑
Install any PowerPath patches
from the Software downloads
page on the EMC Powerlink
website:
http://powerlink.emc.com
❑
Install any PowerPath patches
from the Software downloads
page on the EMC Powerlink
website:
http://powerlink.emc.com
❑
Execute the following PowerPath
command:
powermt config
❑
Execute the following PowerPath
command:
powermt config
PowerPath product
guide
Task
With Access Logix Without Access Logix Reference Document