PowerPath Checklist — Existing NetWare Server and Existing Storage System
4-29
NetWare Installation Checklists
The Without Access Logix column does not apply to CX300, CX500, and
CX700 storage systems because they ship from the factory with the Access
Logix enabler installed.
Task
With Access Logix Without Access Logix Reference Document
1 Server
Install additional
HBAs
❑
If you need additional HBAs to
provide more paths to the storage
system, install these HBAs.
CAUTION Do not connect cables
to the HBAs until you are told to
do so later in this procedure.
❑
If you need additional HBAs to
provide more paths to the storage
system, install these HBAs.
CAUTION Do not connect cables
to the HBAs until you are told to do
so later in this procedure.
HBA documentation
(see URL on page 4-4)
2 Server
Prepare cluster
If the server is in a cluster
❑
Move cluster resources from
server you want to upgrade.
If the server is in a cluster
❑
Move cluster resources from
server you want to upgrade.
NetWare
documentation
❑
Remove the first from the cluster
with the following command:
cluster leave
❑
Remove the first from the cluster
with the following command:
cluster leave
❑
Unload cluster software with the
following command:
uldncs
❑
Unload cluster software with the
following command:
uldncs
3 Server and Client
Remove ATF or
CDE
❑
If ATF or CDE is installed, then
before continuing either remove it
yourself (see caution before this
checklist) or arrange to have
EMC Professional Services
remove it.
❑
If ATF or CDE is installed, then
before continuing either remove it
yourself (see caution before this
checklist) or arrange to have EMC
Professional Services remove it.
Removing ATF or CDE
instruction sheet
4 Server
Update Software
❑
If the following software is
currently installed and not at the
required minimum revision (see
page 4-3), update it:
• HBA driver
• Navisphere Host Agent
• admsnap
❑
If the following software is currently
installed and not at the required
minimum revision (see page 4-3),
update it:
• HBA driver
• Navisphere Host Agent
HBA documentation
(see URL on page 4-4),
CX-Series Server
Software for NetWare
Installation Guide