Filter
Top Products
PowerPath Checklist - Existing HP-UX Server and Existing Storage System
2-33
HP-UX Installation Checklist
PowerPath Checklist - Existing HP-UX Server and Existing Storage
System
Complete the tasks highlighted with grey in the checklist before the
service provider arrives.
The Without Access Logix column does not apply to CX300, CX500, and
CX700 storage systems because they ship from the factory with the Access
Logix enabler installed.
Task
With Access Logix Without Access Logix Reference Document
1 Server
Unmount file
systems
❑
Unmount any file systems that
reside on the storage system.
❑
Unmount any file systems that
reside on the storage system.
HP-UX documentation
2 Server
Install additional
HBAs
❑
If you need additional HBAs to
provide more paths to the storage
system, install these HBAs.
CAUTION Do not connect cables
to the HBAs until you are told to
do so later in this procedure.
❑
If you need additional HBAs to
provide more paths to the storage
system, install these HBAs.
CAUTION Do not connect cables
to the HBAs until you are told to
do so later in this procedure.
HBA documentation
3 Server
Update Software
❑
If the following software is
currently installed and not at the
required minimum revision
(page 2-3), update it:
• HBA driver
• Navisphere Host Agent
• admsnap
❑
If the following software is
currently installed and not at the
required minimum revision
(page 2-3), update it:
• HBA driver (Navisphere Host
Agent
HBA documentation
Navisphere Host Agent
and CLI for HP-UX
installation guide
SnapView installation
guide (revision A02 or
higher)
4 Storage System
Update softwar
e
❑
If currently installed
storage-system software is not at
the required minimum revision
(see page 2-3), update it.
CAUTION During the software
update, hosts connected to the
storage system will lose access to
data if they do not have failover
software or if all paths to an SP
are down.
❑
If currently installed
storage-system software is not at
the required minimum revision
(see page 2-3), update it.
CAUTION During the software
update, hosts connected to the
storage system will lose access to
data if they do not have failover
software or if all paths to an SP
are down.
Navisphere Manager
administrator’s guide
and online help