Filter
Top Products
5-52
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
Solaris Installation Checklists
You are now ready to set up any optional software, such as SnapView
or MirrorView, on the storage system.
CAUTION
!
If you want to install any new software or upgrade any existing
software on a storage system after DMP is installed and running,
you should use the Navisphere Manager Software Installation
Wizard. If this wizard is not supported for your storage system, be
sure to refer to the "Special NDU Procedure" in the "VERITAS
Volume Manager" section for CLARiiON of the Host Connectivity
Guide for Sun Solaris, which is available on the EMC Powerlink
website.
19 Server
Verify DMP
Operation
(cont.)
❑
Determine the controller through which I/O is going with
iostat -xn
VERITAS Volume
Manager documentation
❑
Determine the HBA and SP to which that controller corresponds.
❑
Disconnect the path to that SP.
❑
Verify that the path to the chosen CLARiiON device is disabled with
vxdisk list
device
or
vxdmpadm getsubpaths
dmpnodename=
device
where
device
is the name of the CLARiiON device
❑
Verify that I/0 is still running with
iostat -xn
Task
With Access Logix Reference Document