Filter
Top Products
5-16
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
Solaris Installation Checklists
7 Server
Cable to
switches or
storage system
❑
Cable the HBA ports to the switch
connected to the storage system
or to SP ports.
❑
Cable the HBA ports to the switch
connected to the storage system
or to SP ports.
Storage-system setup
guide.
❑
Checkpoint - For a SAN, verify
the HBA connection to the switch
by checking the LED(s) for the
switch port connected to the HBA
port.
For a 1-Gbit switch - LED is
green, which indicates that the
HBA is logged in to the switch
port.
For a 2-Gigabit switch - One of
the following:
• The left LED is green and the
right LED is off, which indicates
that a 1-Gbit SP port is logged
in to the switch port.
• For a DS-xxB2 switch, both
LEDs are green, which
indicates that a 2-Gbit HBA
port is logged in to the switch
port.
• For a DS-xxM2 switch, the left
LED is blue and the right LED
is off, which indicates that a
2-Gbit HBA port is logged in to
the switch port.
❑
Checkpoint - For a SAN, verify
the HBA connection to the switch
by checking the LED(s) for the
switch port connected to the HBA
port.
For a 1-Gbit switch - LED is
green, which indicates that the
HBA is logged in to the switch
port.
For a 2-Gigabit switch - One of
the following:
• The left LED is green and the
right LED is off, which indicates
that a 1-Gbit SP port is logged
in to the switch port.
• For a DS-xxB2 switch, both
LEDs are green, which
indicates that a 2-Gbit HBA
port is logged in to the switch
port.
• For a DS-xxM2 switch, the left
LED is blue and the right LED
is off, which indicates that a
2-Gbit HBA port is logged in to
the switch port.
Task
With Access Logix Without Access Logix Reference Document