Filter
Top Products
PowerPath Checklist — Existing Solaris Server and Existing Storage System
5-39
Solaris Installation Checklists
8 Server
Install
PowerPath
❑
Install PowerPath.
❑
Install PowerPath. PowerPath release
notes and PowerPath for
UNIX installation and
administrator’s guide
❑
If you have a PowerPath license
key, register it.
❑
If you have a PowerPath license
key, register it
❑
Reboot the server to complete
the installation of PowerPath.
❑
Reboot the server to complete
the installation of PowerPath.
Note The format command will
display n+1 device entries for
each LUN, where n is the number
of paths to the LUN. One of these
entries is a PowerPath device and
the other n entries are native
devices.
Note The format command will
display n+1 device entries for
each LUN, where n is the number
of paths to the LUN. One of these
entries is a PowerPath device and
the other n entries are native
devices.
PowerPath product
guide
❑
Checkpoint - Use the following
PowerPath command to verify
that PowerPath sees the paths to
the LUNs:
powermt display dev=all
class=clariion
If PowerPath does not see the
LUNs
• Verify the server’s connection
to the Storage Group.
• Verify that you registered your
PowerPath license key if you
have one.
• Verify that the storage-system
properties are set as defined in
step 6.
❑
Checkpoint - Use the following
PowerPath command to verify
that PowerPath sees the paths to
the LUNs:
powermt display dev=all
class=clariion
If PowerPath does not see the
LUNs
• Verify that you registered your
PowerPath license key if you
have one.
• Verify that the storage-system
properties are set as defined in
step 6.
Task
With Access Logix Without Access Logix Reference Document