Filter
Top Products
PowerPath Checklist — Existing NetWare Server and Existing Storage System
4-35
NetWare Installation Checklists
10 Server
Cable additional
HBAs to
switches or
storage system
❑
Cable any additional HBA ports to
the switch connected to the
storage system or to SP ports.
❑
Cable any additional HBA ports to
the switch connected to the
storage system or to SP ports.
Storage-system setup
guide.
❑
Checkpoint - For a SAN, verify
the HBA connections to the
switch by checking the LED(s) for
the switch port connected to each
additional HBA port.
For a 1-Gbit switch - LED is
green, which indicates that the
HBA port is logged in to the
switch port.
For a 2-Gbit switch - One of the
following:
• The left LED is green and the
right LED is off, which
indicates that a 1-Gbit SP port
is logged in to the switch port.
• For a DS-xxB2 switch, both
LEDs are green, which
indicates that a 2-Gbit HBA
port is logged in to the switch
port.
• For a DS-xxM2 switch, the left
LED is blue and the right LED
is off, which indicates that a
2-Gbit HBA port is logged in to
the switch port.
❑
Checkpoint - For a SAN, verify the
HBA connections to the switch by
checking the LED(s) for the switch
port connected to each additional
HBA port.
For a 1-Gbit switch - LED is
green, which indicates that the
HBA port is logged in to the switch
port.
For a 2-Gbit switch - One of the
following:
• The left LED is green and the
right LED is off, which indicates
that a 1-Gbit SP port is logged in
to the switch port.
• For a DS-xxB2 switch, both
LEDs are green, which indicates
that a 2-Gbit HBA port is logged
in to the switch port.
• For a DS-xxM2 switch, the left
LED is blue and the right LED is
off, which indicates that a 2-Gbit
HBA port is logged in to the
switch port.
11 Switches
Zone for
additional HBAs
For a SAN
❑
Zone the switches to provide a
path from each additional HBA
port (host initiator) to the SPs.
For a SAN
❑
Zone the switches to provide a
path from each additional HBA port
(host initiator) to the SPs.
Switch management
documentation
❑
Checkpoint - Use switch
management software to verify
the switch connections to the
storage system.
❑
Checkpoint - Use switch
management software to verify the
switch connections to the storage
system.
12 Server
Register
additional HBAs
with storage
system
❑
Reboot the server.
❑
Reboot the server.
❑
Checkpoint - Use Navisphere
Manager’s Connectivity Status
dialog box to verify that each new
HBA is registered with the
storage system.
Navisphere Manager
administrator’s guide
and online help
Task
With Access Logix Without Access Logix Reference Document