Filter
Top Products
PowerPath Checklist - New HP-UX Server and Existing Storage System
2-17
HP-UX Installation Checklist
8Server
Cable to switches
or storage system
(cont.)
For a 2-Gbit switch - One of the
following:
• The left LED is green and the
right LED is off, which indicates
that a 1-Gbit SP port is logged
in to the switch port.
• For a DS-xxB2 switch, both
LEDs are green, which
indicates that a 2-Gbit HBA
port is logged in to the switch
port.
• For a DS-xxM2 switch, the left
LED is blue and the right LED
is off, which indicates that a
2-Gbit HBA port is logged in to
the switch port.
For a 2-Gbit switch - One of the
following:
• The left LED is green and the
right LED is off, which indicates
that a 1-Gbit SP port is logged
in to the switch port.
• For a DS-xxB2 switch, both
LEDs are green, which
indicates that a 2-Gbit HBA
port is logged in to the switch
port.
• For a DS-xxM2 switch, the left
LED is blue and the right LED
is off, which indicates that a
2-Gbit HBA port is logged in to
the switch port.
Storage-system setup
guide
9Switches
Zone
For a SAN
❑
Zone the switches to provide a
path from each HBA port (host
initiator) to the appropriate SPs.
For a SAN
❑
Zone the switches to provide a
path from each HBA port (host
initiator) to the appropriate SPs.
Switch management
documentation
❑
If SAN Copy, MirrorView, or
MirrorView/A is installed, create
any required zones.
❑
Checkpoint - Use switch
management software to verify
the switch connections to the
storage system.
❑
Checkpoint - Use switch
management software to verify
the switch connections to the
storage system.
For a CX400, CX600, or
FC4700-Series storage system, go to
step 11; for an FC4500 storage
system, go to step 13.
Task
With Access Logix Without Access Logix Reference Document