Filter
Top Products
4-26
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
NetWare Installation Checklists
16 Storage System
Set up Event
Monitor
❑
Plan your monitoring configuration. Navisphere Manager
administrator’s guide
and online help
❑
Use Navisphere Manager to set user options, create templates, and set up
your monitoring configuration.
17 Server
Move server back
into cluster
If the server is in a cluster
❑
Load cluster software on the server with the following NetWare command:
ldncs
NetWare documentation
❑
Move cluster resources back to the server.
18 Server
Make LUNs
available to
NetWare
❑
Create partitions or the pertinent database file systems on the LUNs.
If NetWare does not recognize any LUNs, verify the connection to the
Storage Group.
Host connectivity guide
or NetWare
documentation
19 Server
Save PowerPath
configuration
❑
Save the server’s PowerPath configuration with the following PowerPath
command:
powermt -save
This command creates the powermt.ctm configuration file.
PowerPath product
guide
20 Server
Test PowerPath
with a license key
If you have a PowerPath license key
If your PowerPath license key is not registered, the load balancing policy is
restricted to basic failover.
NetWare documentation
❑
View the LUNs available to the server using the PowerPath command
powermt display dev=all class=clariion
PowerPath product
guide
❑
Choose one available LUN to receive I/O for the test.
❑
View the paths to the chosen LUN using the following PowerPath
command:
powermt display dev=
x
every=2
where
x
is a pseudo device that represents the chosen LUN.
❑
Start I/O to the LUN.
❑
Identify the HBA sending I/O to LUN by viewing the output of the powermt
display dev=
x
every=2 command, and disconnect the cable to that HBA.
Task
With Access Logix Reference Document