1-10
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
AIX Installation Checklists
15 Storage System
Configure
❑
Use Navisphere Manager to set general storage-system properties.
Navisphere Manager
administrator’s guide
and online help
❑
Use Navisphere Manager to create RAID Groups, bind LUNs, create
Storage Groups, and assign LUNs to Storage Groups.
❑
Use Navisphere Manager to connect the server to a Storage Group
16 Storage System
Set up Event
Monito
r
❑
Plan your monitoring configuration.
Navisphere Manager
administrator’s guide
and online help
❑
Use Navisphere Manager to set user options, create templates, and set up
your monitoring configuration.
17 Server
Configure
devices
❑
Download the following command from ftp://ftp.emc.com/pub/elab/
powerpath/aix and execute it:
emc_cfgmgr.sh
AIX documentation
❑
Execute the following PowerPath command:
powermt config
PowerPath product
guide
❑
Checkpoint - Verify that the server sees hdisk devices for the LUNs. AIX documentation
❑
Checkpoint - Verify that PowerPath sees all the paths to the LUNs with the
following PowerPath command:
powermt display dev=all class=clariion
If PowerPath does not see the LUNs
• Verify the server’s connection to the Storage Group.
• Verify that you registered your PowerPath license key if you have one.
• Verify that the storage-system properties are as defined in step 12.
PowerPath product
guide
❑
Restart the Navisphere Host Agent or run the Navisphere Server Utility
with the following AIX commands:
Host Agent
/
etc/rc.agent stop
/etc/rc.agent start
Server Utility
/usr/lpp/HOSTUTIL/naviserverutil
CX-Series Server
Software for AIX
Installation Guide
❑
Checkpoint if the Host Agent is installed - Use Navisphere Manager to
verify that the LUNs are mapped to hdiskpower devices.
Navisphere Manager
administrator’s guide
and online help
Task
With Access Logix Reference Document