Filter
Top Products
3-14
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
Linux Installation Checklist
5Storage System
Update software
❑
If currently installed
storage-system software is not at
the required minimum revision,
update it.
CAUTION During the software
update, hosts connected to the
storage system will lose access to
data if they do not have failover
software or if all paths to an SP
are down.
❑
If currently installed
storage-system software is not at
the required minimum revision,
update it.
CAUTION During the software
update, hosts connected to the
storage system will lose access to
data if they do not have failover
software or if all paths to an SP
are down.
Navisphere Manager
administrator’s guide
and online help
6Server
Cable HBAs to
switches or
storage system
❑
Cable the HBA ports to the switch
connected to the storage system
or to SP ports.
❑
Cable the HBA ports to the switch
connected to the storage system
or to SP ports.
Storage-system setup
guide.
❑
Checkpoint - For a SAN, verify
the HBA connections to the
switch by checking the LED(s) for
the switch port connected to each
additional HBA port.
For a 1-Gbit switch - LED is
green, which indicates that the
HBA port is logged in to the
switch port.
❑
Checkpoint - For a SAN, verify
the HBA connections to the
switch by checking the LED(s) for
the switch port connected to each
additional HBA port.
For a 1-Gbit switch - LED is
green, which indicates that the
HBA port is logged in to the
switch port.
Switch documentation
For a 2-Gbit switch - One of the
following:
• The left LED is green and the
right LED is off, which indicates
that a 1-Gbit SP port is logged
in to the switch port.
• For a DS-xxB2 switch, both
LEDs are green, which
indicates that a 2-Gbit HBA
port is logged in to the switch
port.
• For a DS-xxM2 switch, the left
LED is blue and the right LED
is off, which indicates that a
2-Gbit HBA port is logged in to
the switch port.
For a 2-Gbit switch - One of the
following:
• The left LED is green and the
right LED is off, which indicates
that a 1-Gbit SP port is logged
in to the switch port.
• For a DS-xxB2 switch, both
LEDs are green, which
indicates that a 2-Gbit HBA
port is logged in to the switch
port.
• For a DS-xxM2 switch, the left
LED is blue and the right LED
is off, which indicates that a
2-Gbit HBA port is logged in to
the switch port.
Switch documentation
Task
With Access Logix Without Access Logix Reference Document