Filter
Top Products
7-28
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
Windows Installation Checklists
5 Storage System
Configure (cont.)
❑
Reboot the server so Windows
Server 2003 or Windows 2000
recognizes the LUNs.
Now the LUNs in the Storage
Group look like any other disks in
the server.
❑
Reboot the server so Windows
Server 2003 or Windows 2000
recognizes the LUNs.
Now the LUNs look like any other
disks in the server.
Windows documentation
6Server
Create HBA
driver diskette
❑
Create a diskette with the EMC
HBA driver from the HBA
vendor’s web site.
❑
Create a diskette with the EMC
HBA driver from the HBA
vendor’s web site
URL on 7-5
7Server
Set up HBA BIOS
❑
If required, either update the
Emulex HBA firmware and/or
BIOS or update the QLogic HBA
firmware and/or NVRAM.
❑
If required, either update the
Emulex HBA firmware and/or
BIOS or update the QLogic HBA
firmware and/or NVRAM.
HBA documentation
(see URL on 7-5)
❑
Reboot the server.
❑
Reboot the server.
❑
Set up HBA BIOS.
❑
Set up HBA BIOS.
8 Fibre Channel
Switches
Zone
For a Fibre Channel SAN
❑
Zone the Fibre Channel switches
to provide a single from the
server to each SP.
For a Fibre Channel SAN
❑
Zone the Fibre Channel switches
to provide a single from the
server to each SP.
Switch management
documentation
❑
Checkpoint - Use Fibre Channel
switch management software to
verify the switch connections to
the storage system.
❑
Checkpoint - Use Fibre Channel
switch management software to
verify the switch connections to
the storage system
9 Storage System
Register HBAs
❑
Use Navisphere Manager’s
Connectivity Status dialog box
to register each HBA with the
storage system.
N/A Navisphere Manager
administrator’s guide
and online help
10 Server
Prepare for
installing
operating
system
❑
Disconnect any SCSI hard disk
connected to the server.
❑
Disconnect any SCSI hard disk
connected to the server.
HBA documentation
(see URL on 7-5)
❑
Configure the HBA boot BIOS.
❑
Configure the HBA boot BIOS.
11 Server
Install Windows
Server 2003 or
Windows 2000
❑
Install Windows Server 2003 or
Windows 2000 and the HBA
driver on the boot LUN in the
storage system.
Note: During the installation
procedure, you will partition the boot
LUN.
❑
Install Windows Server 2003 or
Windows 2000 and the HBA
driver on the boot LUN in the
storage system.
Note: During the installation
procedure, you will partition the boot
LUN
Windows documentation
and HBA documentation
(see URL on 7-5)
Task
With Access Logix Without Access Logix Reference Document