Checklist - New Tru64 UNIX Server and New Storage System With Boot Disk
6-9
Tru64 UNIX Installation Checklist
10 Server
Update SRM Console
for Boot LUN
❑
At the SRM console, execute the init command.
Host connectivity guide for Tru64 UNIX
and Tru64 UNIX documentation
❑
Execute the following command:
wwidmgr -quickset -udid
udid-num
where
udid-num
is the UDID number of the boot LUN.
❑
At the SRM console, execute the init command again.
❑
Checkpoint — Verify that the boot LUN is visible with
the following command:
show device
Only one entry for the LUN should appear in the device
list for each path between the server and the storage
system.
❑
Set the boot LUN as default boot device with the
following command:
set bootdef_dev
being sure to include all paths to the boot LUN.
❑
Boot the server with the following command:
boot
11 Storage System
Set up security
❑
For Navisphere 6.X, use Navisphere Manager to define
a global administrator (if not already defined) and any
additional users.
Navisphere security administrator’s
guide and Navisphere Manager online
help
12 Storage System
Configure
❑
Use Navisphere Manager to set general storage-system
properties.
❑
Use Navisphere Manager to create additional RAID
Groups (if desired), bind LUNs, and assign the LUNs to
the Storage Group.
13 Storage System
Set up Event Monitor
❑
Plan your monitoring configuration.
Navisphere Manager administrator’s
guide and online help
❑
Use Navisphere Manager to set user options, create
templates, and set up your monitoring configuration.
Task
With Access Logix Reference Document