2-20
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
HP-UX Installation Checklist
13
FC4500
Storage
System
Set properties for
PowerPath (cont.)
From an attached host or networked
host
❑
Use the following Navisphere CLI
commands to set the following
default storage-system properties
for the server’s existing HBA
existing ports (initiators):
navicli -d
device
-h
hostname
storagegroup -sethost
-
failovermode 1
navicli -d
device
-h
hostname
storagegroup -sethost
-arraycommpath 1
where
device
is the storage system’s
name
hostname
is the server’s name or
network address.
From an attached or networked host
❑
Use the following Navisphere CLI
commands to set the following
default storage-system properties:
navicli -d
device
-h
hostname
failovermode 1
navicli -d
device
-h
hostname
arraycommpath 1
where
device
is the storage system’s
name
hostname
is the server’s name or
network address.
Navisphere CLI
reference
From a serially connected laptop
❑
Use the following Navisphere CLI
commands to set the following
default storage-system properties
for the server’s existing HBA
existing ports (initiators):
navicli -np -d
device
storagegroup -sethost -host
servername -
failovermode 1
navicli -np -d
device
storagegroup -sethost -host
servername --
arraycommpath 1
where
device
is the name of the
computer port connected to the
storage-system serial port (for
example, com1).
servername
is the name of the
server with the HBAs.
From a serially connected laptop
❑
Use the following Navisphere CLI
commands to set the following
default storage-system properties:
navicli -np -d
device
failovermode 1
navicli -np -d
device
arraycommpath 1
where
device
is the name of the
computer port connected to the
storage-system serial port (for
example, com1).
Storage-system setup
guide and Navisphere
CLI reference
Task
With Access Logix Without Access Logix Reference Document