Filter
Top Products
5-46
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
Solaris Installation Checklists
◆ You have a host that is
• Running an operating system that can support the Navisphere
Manager 6.X browser-based client. For an up-to-date list of
such operating systems, refer to the Navisphere Manager 6.X
release notes on http://powerlink.emc.com.
• On a network that is connected to the storage-system server
that you will connect to the SPs in the storage system.
◆ You must have planned your LUNs and RAID Groups, and
Storage Groups if you have Access Logix. Be sure to consider
requirements for SAN Copy, SnapView, MirrorView, and
MirrorView/A if you have this software. The EMC CLARiiON
CX300, CX500, CX500i, and CX700 Storage Systems Configuration
Planning Guide (P/N 300-001-273) will help you with this
planning.
Documentation
This checklist refers to some or all of the documents listed below. We
recommend that you load these documents on your service laptop
before starting the installation.
◆ Documentation that ships with the HBA and HBA driver.
This documentation is also available from the following websites:
For Emulex HBAs and drivers:
http://www.emulex.com/ts/docoem/framemc.htm
For QLogic HBAs and drivers:
http://www.qlogic.com/support/drivers_software.asp
and select EMC in the OEM-approved Drivers/Firmware list at the
bottom of the page.
◆ Documentation that ships with
• Switches and switch management software
•Sun Solaris
®
operating system
• VERITAS Volume Manager
◆ Storage-System Host Utilities for Solaris Administrator’s Guide
(P/N 069001140)
◆ EMC CX-Series Server Software for Solaris Installation Guide
(P/N 300-002-039)
◆ EMC Rails and Enclosures Installation Guide for 19-Inch NEMA
Cabinets (P/N 014003082)