Filter
Top Products
PowerPath Checklist — New AIX Server and Existing Storage System
1-17
AIX Installation Checklists
11 Server
Make target SPs
available
❑
On the server:
• Download emc_cfgmgr.sh
from
ftp://ftp.emc.com/pub/elab/
powerpath/aix.
• Execute the following
commands
cfgmgr
❑
On the server:
• Download emc_cfgmgr.sh
from
ftp://ftp.emc.com/pub/elab/
powerpath/aix.
• Execute the following
commands
cfgmgr
AIX documentation
❑
Checkpoint - Verify that each
HBA sees only the targets (SPs)
to which it is zoned with the
following AIX command:
lsdev -Cc array
❑
Checkpoint - Verify that each
HBA sees only the targets (SPs)
to which it is zoned with the
following AIX command:
lsdev -Cc array
❑
Checkpoint - Verify that AIX sees
LUNZ devices with the following
AIX command:
lscfg | grep LUNZ
If AIX does not see LUNZ devices
• Verify that arraycommpath is
set to 1 as described in
step 12.
• Execute the following AIX
command:
emc_cfgmgr.sh
❑
Checkpoint - Verify that AIX sees
LUNZ devices with the following
AIX command:
lscfg | grep LUNZ
If AIX does not see LUNZ devices
• Verify that arraycommpath is
set to 1 as described in
step 12.
• Execute the following AIX
command:
emc_cfgmgr.sh
❑
Restart the Navisphere Host
Agent or run the Navisphere
Server Utility with the following
AIX commands:
Host Agent
/
etc/rc.agent stop
/etc/rc.agent start
Server Utility
/usr/lpp/HOSTUTIL/naviserverutil
❑
Restart the Navisphere Host
Agent or run the Navisphere
Server Utility with the following
AIX commands:
Host Agent
/
etc/rc.agent stop
/etc/rc.agent start
Server Utility
/usr/lpp/HOSTUTIL/naviserverutil
CX-Series Server
Software for AIX
Installation Guide
❑
Checkpoint - Use Navisphere
Manager’s Connectivity Status
dialog box to verify that each HBA
is registered with the storage
system.
❑
Checkpoint - Use Navisphere
Manager’s Connectivity Status
dialog box to verify that each HBA
is registered with the storage
system.
Navisphere Manager
administrator’s guide
and online help
Task
With Access Logix Without Access Logix Reference Document