Filter
Top Products
7-18
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
Windows Installation Checklists
11 Fibre Channel
Switches
Zone additional
paths
For a Fibre Channel SAN
❑
Zone the Fibre Channel switches
to provide a path from each HBA
port (host initiator) to the
appropriate SPs.
For a Fibre Channel SAN
❑
Zone the Fibre Channel switches
to provide a path from each HBA
port (host initiator) to the
appropriate SPs.
Fibre Channel switch
management
documentation
❑
If SAN Copy, MirrorView, or
MirrorView/A is installed, create
any required zones.
❑
Checkpoint - Use switch
management software to verify
the switch connections to the
storage system.
❑
Checkpoint - Use switch
management software to verify
the switch connections to the
storage system.
For a CX-Series or
FC4700-Series storage system,
go to step 13.
For an FC4500 storage system,
go to step 14.
12 Storage System
Register HBAs or
NICs
❑
On the server, restart the
Navisphere Host Agent or run the
Navisphere Server Utility.
N/A Navisphere Host Agent
and CLI for Windows
installation guide or
storage-system setup
guide
❑
Checkpoint - Use Navisphere
Manager’s Connectivity Status
dialog box to verify that each HBA
or NIC is registered with the
storage system.
Navisphere Manager
administrator’s guide
and online help
Task
With Access Logix Without Access Logix Reference Document