Filter
Top Products
1-18
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
AIX Installation Checklists
11 Server
Make target SPs
available (cont.)
❑
List the LUNZ devices with the
following AIX command:
lscfg | grep LUNZ
❑
List the LUNZ devices with the
following AIX command:
lscfg | grep LUNZ
AIX documentation
❑
Remove each LUNZ device with
the following AIX command:
rmdev -dl hdisk
n
where
n
is the hdisk number for
the LUNZ device.
❑
Remove each LUNZ device with
the following AIX command:
rmdev -dl hdisk
n
where
n
is the hdisk number for
the LUNZ device.
❑
Use the following Navisphere CLI
command to set the array
commpath property to 0:
navicli -h
hostname
arraycommpath 0
where
hostname
is the IP
address or network name of an
SP in the storage system.
❑
Use the following Navisphere CLI
command to set the array
commpath property to 0:
navicli -h
hostname
arraycommpath 0
where
hostname
is the IP
address or network name of an
SP in the storage system.
Navisphere CLI
reference
❑
Execute the following AIX
command:
cfgmgr
❑
Execute the following AIX
command:
cfgmgr
AIX documentation
12 Storage System
Configure
❑
If the server will use an
existing
Storage Group, use Navisphere
Manager to connect the server to
the Storage Group.
N/A Navisphere Manager
administrator’s guide
and online help
❑
If the server will use a
new
Storage Group, use Navisphere
Manager to create RAID Groups,
bind LUNs, create the Storage
Group, and assign LUNs to the
Storage Group.
❑
Use Navisphere Manager to
connect the server to the Storage
Group.
13 Storage System
Set up Event
Monito
r
❑
Plan your monitoring
configuration.
❑
Plan your monitoring
configuration.
Navisphere Manager
administrator’s guide
and online help
❑
Use Navisphere Manager to set
user options, create templates,
and set up your monitoring
configuration.
❑
Use Navisphere Manager to set
user options, create templates,
and set up your monitoring
configuration.
Task
With Access Logix Without Access Logix Reference Document