Filter
Top Products
2-14
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
HP-UX Installation Checklist
3 Server
Install Host Agent
(cont.)
❑
Edit the Navisphere Host Agent
configuration file agent.config file
as follows:
• Add the following entry if it
does not already exist:
device auto auto
• Add at least one privileged
user.
• For FC4500 storage systems, if
you know the IP addresses of
the portal storage-system SPs,
add an entry with the following
format for each SP to the
agent.config file:
system@
SP_ip_address
where
SP_ip_address
is the
address of the SP.
❑
Edit the Navisphere Host Agent
configuration file agent.config file
as follows:
• Add the following entry if it
does not already exist:
device auto auto
• Add at least one privileged
user.
• For FC4500 storage systems, if
you know the IP addresses of
the portal storage-system SPs,
add an entry with the following
format for each SP to the
agent.config file:
system@
SP_ip_address
where
SP_ip_address
is the
address of the SP.
CX-Series Server
Software for HP-UX
Installation Guide
❑
Continue to edit the Navisphere
Host Agent configuration file
agent.config file as follows:
• Comment the
OptionsSupported
Autotrespass entry as follows:
# OptionsSupported
Autotrespass
The above entry will set the
initiator type for the HBAs to no
auto trespass when they
register with the storage
system:
• Edit any other entries as
desired.
❑
Continue to edit other entries in
the Navisphere Host Agent
configuration file agent.config file
as desired.
For a CX300, CX500, CX700, or
FC4700-Series storage system, go to
step 5. For an FC4500 storage system,
go to 6.
4 Server
Install admsnap
❑
If the server will be a SnapView
production or secondary host,
install the admsnap utility.
Go to step 7.
N/A CX-Series Server
Software for HP-UX
Installation Guide
Task
With Access Logix Without Access Logix Reference Document