Filter
Top Products
3-36
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
Linux Installation Checklist
14 Server
Install PowerPath
❑
Mount the CD-ROM.
❑
Mount the CD-ROM. PowerPath release
notes and PowerPath for
Linux installation and
administrator’s guide
❑
Install PowerPath.
❑
Install PowerPath.
❑
Unmount the CD-ROM and
remove it from the drive.
❑
Unmount the CD-ROM and
remove it from the drive.
❑
If you have a PowerPath license
key, register it.
❑
If you have a PowerPath license
key, register it.
❑
Reboot the server to complete
the installation of PowerPath.
❑
Reboot the server to complete
the installation of PowerPath.
❑
If you loaded the HBA driver as a
module, verify that all extensions
are loaded.
❑
If you loaded the HBA driver as a
module, verify that all extensions
are loaded.
❑
Install any PowerPath patches
from the Software downloads
page on the EMC Powerlink
website:
http://powerlink.emc.com
❑
Install any PowerPath patches
from the Software downloads
page on the EMC Powerlink
website:
http://powerlink.emc.com
❑
Checkpoint - Verify that
PowerPath sees the paths to the
LUNs using the following
PowerPath command:
powermt display dev=all
class=clariion
If PowerPath does not see the
LUNs
• Verify the server’s connection
to the Storage Group.
• Make sure that you registered
your PowerPath license key if
you have one.
• Verify that the storage-system
properties are as defined in
step 5.
• Verify that you have the
appropriate revision of the
HBA driver loaded.
❑
Checkpoint - Verify that
PowerPath sees the paths to the
LUNs using the following
PowerPath command:
powermt display dev=all
class=clariion
If PowerPath does not see the
LUNs
• Make sure that you registered
your PowerPath license key if
you have one.
• Verify that the storage-system
properties are as defined in
step 5.
• Verify that you have the
appropriate revision of the
HBA driver loaded.
PowerPath product
guide
Task
With Access Logix Without Access Logix Reference Document