Filter
Top Products
3-46
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
Linux Installation Checklist
You are now ready to set up any optional software, such as SnapView
or MirrorView, on the storage system.
CAUTION
!
If you want to install any new software or upgrade any existing
software on a storage system after DMP is installed and running,
you should use the Navisphere Manager Software Installation
Wizard. If this wizard is not supported for your storage system, be
sure to refer to the "Special NDU Procedure" in the EMC Linux
Utility Kit Release Notes, which are available on the EMC
Powerlink website.
19 Server
Verify DMP
Operation
(cont.)
❑
Verify that the path to the chosen CLARiiON device is disabled with
vxdisk list
device
or
vxdmpadm getsubpaths
dmpnodename=
device
where
device
is the name of the CLARiiON device
VERITAS Volume
Manager documentation
❑
Verify that I/0 is still running with
iostat -xn
Task
With Access Logix Reference Document