PowerPath Checklist — Existing Windows Server and Existing Storage System
7-51
Windows Installation Checklists
9Server
Install PowerPath
❑
Install PowerPath.
❑
Install PowerPath. PowerPath release
notes and PowerPath for
Windows installation
and administrator’s
guide
❑
Reboot the server to complete
the installation of PowerPath.
❑
Reboot the server to complete
the installation of PowerPath.
❑
Install any PowerPath patches
from the Software downloads
page on the EMC Powerlink
website:
http://powerlink.emc.com
❑
Install any PowerPath patches
from the Software downloads
page on the EMC Powerlink
website:
http://powerlink.emc.com
❑
Checkpoint - Use one of the
following ways to verify that
PowerPath sees the paths to the
LUNs:
• PowerPath Administrator
(Start > Programs
>
EMC >
PowerPath Administrator)
• PowerPath command
powermt display dev=all
class=clariion
If PowerPath does not see the
LUNs
• Verify the server’s connection
to the Storage Group.
• Verify that you registered your
PowerPath license key if you
have one.
• Verify that the storage-system
properties are as defined in
step 7 or 8.
❑
Checkpoint - Use one of the
following ways to verify that
PowerPath sees the paths to the
LUNs:
• PowerPath Administrator
(Start > Programs
>
EMC >
PowerPath Administrator)
• PowerPath command
powermt display dev=all
class=clariion
If PowerPath does not see the
LUNs
• Verify that you registered your
PowerPath license key if you
have one.
• Verify that the storage-system
properties are as defined in
step 7 or 8.
PowerPath product
guide
❑
Checkpoint - Use Disk
Management to verify each path
to the storage system.
❑
Checkpoint - Use Disk
Management to verify each path
to the storage system.
Windows documentation
Task
With Access Logix Without Access Logix Reference Document