Filter
Top Products
1-12
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
AIX Installation Checklists
PowerPath Checklist
—
New AIX Server and Existing Storage
System
Tasks highlighted with grey in the checklist should be completed
before the service provider arrives.
Task
With Access Logix Without Access Logix Reference Document
1 Server
Install HBAs and
driver
❑
Install HBAs.
CAUTION Do not connect cables
to the HBAs until you are told to
do so later in this procedure.
❑
Install HBAs.
CAUTION Do not connect cables
to the HBAs until you are told to
do so later in this procedure.
HBA documentation
❑
Install HBA driver.
❑
Install HBA driver.
❑
Execute the following command:
cfgmgr
❑
Execute the following command:
cfgmgr
AIX documentation
2 Server
Set HBA driver
parameters
❑
Set the HBA driver parameters to
the values required for CLARiiON
and PowerPath.
CAUTION Using improper
settings can cause erratic failover
behavior, such as greatly
increased I/O delays.
❑
Set the HBA driver parameters to
the values required for CLARiiON
and PowerPath.
CAUTION Using improper
settings can cause erratic failover
behavior, such as greatly
increased I/O delays.
Host connectivity guide
3 Server
Install EMC ODM
Support software
❑
Insert the AIX Utilities Kit CD and
mount it.
❑
Insert the AIX Utilities Kit CD, and
mount it
AIX utilities
administrator’s guide
❑
Install EMC ODM Support using
SMIT or the command line.
Note: The EMC ODM Support
package is available on the ftp site
ftp://ftp.emc.com/pub/elab/aix/ODM_D
EFINITIONS
❑
Install EMC ODM Support using
SMIT or the command line.
Note: The EMC ODM Support
package is available on the ftp site
ftp://ftp.emc.com/pub/elab/aix/ODM_D
EFINITIONS