Filter
Top Products
PowerPath Checklist — Existing Solaris Server and New Storage System
5-31
Solaris Installation Checklists
You are now ready to set up any optional software, such as SnapView
or MirrorView, on the storage system.
20 Server
VERITAS VxVM
For a server with VERITAS VxVM V3.1.1 or below
❑
Before you reboot the server, edit the /etc/rcS.d/S24powerstartup file to
add the following two lines to the bottom of the file after the last fi
character:
/etc/powermt set volume_open_policy=firstpath
echo "PowerPath:powermt set volume_open_policy=firstpath"
On the next reboot, the first path policy used by CLARiiON storage
systems will take effect.
VERITAS VxVM
documentation and
EMC manual on
installing and
configuring EMP
power devices with
Solaris applications
For a server with VERITAS VxVM V3.2 or above
❑
Issue the following command:
vxddladm addjbod vid=DGC pagecode 0x83 offset=8 length=16
You need to issue this command just once and it will take effect on the next
reboot.
Task
With Access Logix Reference Document