1-38
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
AIX Installation Checklists
14 Server
Configure
devices
❑
If you replaced HBAs or added
additional HBAs, use Navisphere
Manager to disconnect and then
reconnect the server and its
Storage Group.
Navisphere Manager
administrator’s guide
and online help
❑
Execute the following command:
emc_cfgmgr.sh
❑
Execute the following command:
emc_cfgmgr.sh
AIX documentation
❑
Execute the following PowerPath
command:
powermt config
❑
Execute the following PowerPath
command:
powermt config
PowerPath product
guide
❑
Checkpoint - Verify that the
server sees hdiskpower devices
for the LUNs.
❑
Checkpoint - Verify that the
server sees hdiskpower devices
for the LUNs.
❑
Checkpoint - Verify that
PowerPath sees all the paths to
the LUNs with the following
PowerPath command:
powermt display dev=all
class=clariion
If PowerPath does not see the
LUNs
• Verify the server’s connection
to the Storage Group.
• Verify that you registered your
PowerPath license key if you
have one.
• Verify that the storage-system
properties are as defined in
step 9.
❑
Checkpoint - Verify that
PowerPath sees all the paths to
the LUNs with the following
PowerPath command:
powermt display dev=all
class=clariion
If PowerPath does not see the
LUNs
• Verify that you registered your
PowerPath license key if you
have one.
• Verify that the storage-system
properties are as defined in
step 9.
PowerPath product
guide
Task
With Access Logix Without Access Logix Reference Document