Filter
Top Products
7-22
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
Windows Installation Checklists
16 Storage System
Configure (cont.)
For an FC4500 storage system
❑
Disconnect the computer from
the serial port on the storage
system.
For an FC4500 storage system
❑
Disconnect the computer from
the serial port on the storage
system.
Storage-system setup
guide
17 CX500i Storage
System
Configure
optional
storage-system
CHAP security
If CHAP security is configured for the
storage-system SP port connected to
a new NIC or HBA initiator, the new
initiator must use CHAP. If you want a
new initiator to use the credentials
already set for that SP port, you do not
need to configure the storage-system
CHAP for the new initiator.
❑
Use Navisphere Manager to
configure initiator CHAP on the
storage system for each new NIC
or HBA that needs it configured.
N/A Storage-system setup
guide
18 Server With
CX500i Storage
System
Configure
optional server
CHAP security
If you configured CHAP security on the
storage system, you must configure it
for the server’s iSCSI Initiator.
For NIC Initiators
❑
If CHAP is not already enabled on
the storage system, use
Navisphere Manager to enable it.
N/A Storage-system setup
guide and Manager
online help
❑
Use Microsoft iSCSI Software
Initiator to configure initiator
CHAP on the NIC initiators on the
server.
N/A Storage-system setup
guide and Microsoft
documentation
For iSCSI HBAs
❑
If CHAP is already enabled on the
storage system, use Navisphere
Manager to disable it.
N/A
❑
Use QLogic SANsurfer to
configure initiator CHAP on the
HBA initiators on the server.
N/A Storage-system setup
guide and SANsurfer
documentation
❑
If you disabled CHAP on the
storage system, use Navisphere
Manager to re-enable CHAP on
the storage system.
N/A Storage-system setup
guide and Manager
online help
Task
With Access Logix Without Access Logix Reference Document