Filter
Top Products
DMP Configurations for Solaris
5-45
Solaris Installation Checklists
DMP Configurations for Solaris
Read this section if you are installing a Solaris VERITAS DMP
configuration with a new server and a new storage system. A new
server and a new storage system are defined as follows:
new server - A server running Solaris and not connected to any
storage system.
new storage system - A CX300, CX500, or CX700 storage system that
has factory default settings and has never been connected to a server.
Topics relating to the checklist for Solaris DMP configurations are
◆ Required Host Software Revisions................................................ 5-45
◆ Prerequisites ..................................................................................... 5-45
◆ Documentation................................................................................. 5-46
◆ DMP Checklist - New Solaris Server and New Storage System5-48
Required Host
Software Revisions
◆ Solaris operating system revision and patches listed in the EMC
Support Matrix on the Powerlink website
(http://powerlink.emc.com)
◆ HBA driver revision listed in the EMC Support Matrix on the
Powerlink website (http://powerlink.emc.com)
◆ VxVM 3.2 update 2 or higher
Prerequisites
◆ You have installed the storage systems and, for FC4700 storage
systems, initialized them (see storage-system initialization guide).
◆ You have set up storage-system security (see Security
administrator’s guide and Navisphere Manager online help).
◆ You have installed any switches and connected the
storage-system SPs to switch ports (see switch documentation)
◆ You have installed Navisphere Manager.