2-24
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
HP-UX Installation Checklist
17 Storage System
Set up Event
Monitor
❑
Plan your monitoring
configuration.
❑
Plan your monitoring
configuration.
Navisphere Manager
administrator’s guide
and online help
18
Server
Configure any
new PowerPath
devices
❑
Configure PowerPath with the
following command:
powermt config
❑
Configure PowerPath with the
following command:
powermt config
PowerPath product
guide
❑
Checkpoint - Verify that
PowerPath sees all the paths to
the LUNs with the following
PowerPath command:
powermt display dev=all
class=clariion
❑
Checkpoint - Verify that
PowerPath sees all the paths to
the LUNs with the following
PowerPath command:
powermt display dev=all
class=clariion
❑
If PowerPath can see all the path
to the LUNs, save the PowerPath
configuration with the following
command:
powermt save
The PowerPath configuration is
saved in the following file:
/etc/powermt.custom
❑
If PowerPath can see all the path
to the LUNs, save the PowerPath
configuration with the following
command:
powermt save
The PowerPath configuration is
saved in the following file:
/etc/powermt.custom
19 Server
Test PowerPath
with a license
key
If you have a PowerPath license key
Note If your PowerPath license key is
not registered, the load balancing
policy is restricted to basic failover.
❑
Stop all applications accessing
the storage system and disable
user logins to the server.
If you have a PowerPath license key
Note If your PowerPath license key is
not registered, the load balancing
policy is restricted to basic failover.
❑
Stop all applications accessing
the storage system and disable
user logins to the server.
❑
View the LUNs available to the
server using the following
PowerPath command:
powermt display dev=all
class=clariion
❑
View the LUNs available to the
server using the following
PowerPath command:
powermt display dev=all
class=clariion
PowerPath product
guide
❑
Choose one available LUN to
receive I/O for the test.
❑
Choose one available LUN to
receive I/O for the test.
Task
With Access Logix Without Access Logix Reference Document