Filter
Top Products
PowerPath Checklist - New HP-UX Server and Existing Storage System
2-15
HP-UX Installation Checklist
5
CX400, CX600, or
FC4700-Series
Storage-System
Without Access
Logix
Set
storage-system
type
N/A Perform this task
either
• from an attached host or a host
networked to an attached host
or
• from a laptop connected to the
storage system, as described in the
storage-system initialization or
setup guide.
Navisphere CLI
reference
❑
Use the following Navisphere CLI
command to set the system type
to no auto trespass:
navicli -h
hostname
systemtype
-config a
where
hostname
is the IP address or
network name of an SP in the
storage system.
Go to step 7.
6
FC4500
Storage-System
Without Access
Logix
Set
storage-system
type
N/A Perform this task
either
• from an attached host or a host
networked to an attached host,
or
• from a laptop connected to a
storage-system serial port, as
described in the storage-system
setup guide.
Navisphere CLI
reference
From an attached or networked host
❑
Use the following Navisphere CLI
command to set the system type
to no auto trespass:
navicli -d
device
-h
hostname
systemtype -config a
where
device
is the storage system’s
name
hostname
is the server’s name or
network address.
Task
With Access Logix Without Access Logix Reference Document