PowerPath Checklist - New HP-UX Server and New Storage System
2-7
HP-UX Installation Checklist
PowerPath Checklist - New HP-UX Server and New Storage
System
Tasks highlighted with grey in the checklist should be completed
before the service provider arrives
Task
With Access Logix Reference Document
1 Server
Install HBAs,
drivers, cables
❑
Install the HBAs.
HBA documentation
❑
Connect a cable from each host HBA port to a switch port or an SP port.
❑
Install the HBA driver.
2 Server
Set HBA driver
parameters
❑
Set the HBA driver parameters to the values required for CLARiiON. Host connectivity
guide and HBA
documentation
❑
Reboot the server to complete the installation of the drivers.
3 Server
Install Host Agent
❑
Install the Navisphere Host Agent and CLI. CX-Series Server
Software for HP-UX
Installation Guide
❑
Modify user login scripts.
❑
Edit the Navisphere Host Agent configuration file agent.config file as
follows:
• Add the following entry if it does not already exist:
device auto auto
• Add at least one privileged user.
❑
Continue to edit the Navisphere Host Agent configuration file agent.config
file as follows:
• Comment the OptionsSupported Autotrespass entry as follows:
# OptionsSupported Autotrespass
The above entry will set the initiator type for the HBAs to no auto
trespass when they register with the storage system:
• Edit any other entries as desired.
CX-Series Server
Software for HP-UX
Installation Guide
4 Server
Install admsnap
❑
If the server will be a SnapView production or secondary host, install the
admsnap utility.
CX-Series Server
Software for HP-UX
Installation Guide