1-26
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
AIX Installation Checklists
16 Server
Make target SPs
available
❑
Download the following command from ftp://ftp.emc.com/pub/elab/
powerpath/aix and execute it:
emc_cfgmgr.sh
AIX documentation
❑
Checkpoint - Verify that AIX sees LUNZ devices with the following AIX
command:
lscfg | grep LUNZ
If AIX does not see LUNZ devices
• Verify that arraycommpath is set to 1 as described in step 12.
• Execute the following AIX command:
emc_cfgmgr.sh
❑
Restart the Navisphere Host Agent or run the Navisphere Server Utility
with the following AIX commands:
Host Agent
/
etc/rc.agent stop
/etc/rc.agent start
Server Utility
/usr/lpp/HOSTUTIL/naviserverutil
CX-Series Server
Software for AIX
installation guide
❑
Checkpoint - Use Navisphere Manager’s Connectivity Status dialog box
to verify that each HBA is registered with the storage system.
Navisphere Manager
administrator’s guide
and online help
❑
List the LUNZ devices with the following AIX command:
lscfg | grep LUNZ
AIX documentation
❑
Remove each LUNZ device with the following AIX command:
rmdev -dl hdisk
n
where
n
is the hdisk number for the LUNZ device.
17 Storage System
Configure
❑
Use Navisphere Manager to set general storage-system properties.
Navisphere Manager
administrator’s guide
and online help
❑
Use Navisphere Manager to create RAID Groups, bind LUNs, create
Storage Groups, and assign LUNs to Storage Groups.
❑
Use Navisphere Manager to connect the server to a Storage Group
18 Storage System
Set up Event
Monito
r
❑
Plan your monitoring configuration.
Navisphere Manager
administrator’s guide
and online help
❑
Use Navisphere Manager to set user options, create templates, and set up
your monitoring configuration.
Task
With Access Logix Reference Document