Filter
Top Products
3-4
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
Linux Installation Checklist
◆ You must have planned your LUNs and RAID Groups, and
Storage Groups if you have Access Logix. Be sure to consider
requirements for SAN Copy, SnapView, MirrorView, and
MirrorView/A if you have this software. The following
documents will help you with this planning:
• EMC Fibre Channel Storage System CX200-Series Configuration
Planning Guide (P/N 014003115)
• EMC CLARiiON CX300, CX500, CX500i, and CX700 Storage
Systems Configuration Planning Guide (P/N 300-001-273)
• EMC CX400-Series and CX600-Series Storage Systems
Configuration Planning Guide (P/N 014003113)
• EMC Fibre Channel Storage System Model FC4700-2
Configuration Planning Guide (P/N 014003087)
• EMC Fibre Channel Storage System Model FC4700 Configuration
Planning Guide (P/N 014003016)
• EMC Fibre Channel Storage System Model FC4500, FC5300, and
FC5700 Configuration Planning Guide (P/N 014003039)
Documentation
Each checklist refers to some or all of the documents listed below. We
recommend that you load these documents on your service laptop or,
for an FC4500 or FC4700, on the computer you will connect to the
storage system, before starting the installation.
◆ Documentation that ships with
• HBA and HBA driver
This documentation is also available from the following website:
For Qlogic HBAs and drivers:
http://www.qlogic.com/support/drivers_software.asp
and select EMC in the OEM-approved Drivers/Firmware list at the
bottom of the page.
• Switches and switch management software
• Red Hat Linux operating system
◆ PowerPath Version 4.3 Product Guide (P/N 300-001-673)
or
PowerPath Version 3.0 Product Guide (P/N 300-001-047)