2-4
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
HP-UX Installation Checklist
◆ You must have planned your LUNs and RAID Groups, and
Storage Groups if you have Access Logix. Be sure to consider
requirements for SAN Copy, SnapView, MirrorView, and
MirrorView/A if you have this software. The following
documents will help you with this planning:
• EMC CLARiiON CX300, CX500, CX500i, and CX700 Storage
Systems Configuration Planning Guide (P/N 300-001-273)
• EMC CX400-Series and CX600-Series Storage Systems
Configuration Planning Guide (P/N 014003113)
• EMC Fibre Channel Storage System Model FC4700-2
Configuration Planning Guide (P/N 014003087)
• EMC Fibre Channel Storage System Model FC4700 Configuration
Planning Guide (P/N 014003016)
Documentation
This checklist refers to some or all of the documents listed below. We
recommend that you load these documents on your service laptop
before starting the installation.
◆ Documentation that ships with
• HBA and HBA driver
• Switches and switch management software
• HP-UX operating system
◆ PowerPath Version 4.3 Product Guide (P/N 300-001-673)
or
PowerPath Version 4.2 Product Guide (P/N 300-001-521)
or
PowerPath Version 4.1 Product Guide (P/N 300-001-290)
or
PowerPath Version 3.0 Product Guide (P/N 300-001-047)
◆ PowerPath for HP-UX Version 4.3 Installation and Administration
Guide (P/N 300-001-682)
or
PowerPath for HP-UX Version 4.2 Installation and Administration
Guide (P/N 300-001-529)
or
PowerPath Version 4.1 for HP-UX Installation and Administration
Guide (P/N 300-001-297)
or