PowerPath Checklist - Existing HP-UX Server and New Storage System
2-27
HP-UX Installation Checklist
6Server
Install PowerPath
❑
Insert the PowerPath installation CD and mount it. PowerPath Release
Notes and PowerPath
for UNIX installation
and administrator’s
guide
❑
Install PowerPath.
❑
Register PowerPath.
❑
Install any PowerPath patches from the Software downloads page on the
EMC Powerlink website:
http://powerlink.emc.com
❑
Execute the following PowerPath command:
powermt config
PowerPath product
guide
❑
Checkpoint - Use the following PowerPath command to verify that
PowerPath sees the paths to the LUNs:
powermt display dev=all class=clariion
If PowerPath does not see the LUNs
• Verify the server’s connection to the Storage Group.
• Verify that you registered your PowerPath license key if you have one.
❑
If you did not follow the above steps exactly and caused any LUNs to
trespass, restore the LUNs to their original SP with the following PowerPath
command:
powermt restore
7 Storage System
Install
❑
Install the storage system in the cabinet, if not already installed. Rails and cabinet
documentation
8 Storage System
Initialize and
install software
enablers
❑
Install the Navisphere Initialization Utility on a host on the
same subnet
as
the storage-system management ports.
Storage-system setup
guide
❑
Use the Navisphere Initialization Utility to initialize the storage system.
❑
If you have SAN Copy, SnapView, MirrorView, and/or MirrorView/A
software, install the enabler for them.
Navisphere Manager
administrator’s guide
and online help
Task
With Access Logix Reference Document