Filter
Top Products
4-10
EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
NetWare Installation Checklists
13 Server
Make target SPs
available
❑
Scan for LUNs with the following NetWare command:
scan all luns
NetWare documentation
❑
Checkpoint - Verify that each path has a LUNZ with the following
NetWare command:
list devices
❑
Stop and restart the Navisphere Host Agent or run the Navisphere Server
Utility.
CX-Series Server
Software for NetWare
Installation Guide
❑
Checkpoint - Use Navisphere Manager’s Connectivity Status dialog box
to verify that each HBA is registered with the storage system.
Navisphere Manager
administrator’s guide and
online help
14 Storage System
Configure
❑
Use Navisphere Manager to set general storage-system properties.
Navisphere Manager
administrator’s guide
and online help
❑
Use Navisphere Manager to create RAID Groups, bind LUNs, create
Storage Groups, and assign LUNs to Storage Groups.
❑
Use Navisphere Manager to connect the server to a Storage Group
❑
Reboot the server.
NetWare should see DGC disk devices instead of LUNZ devices.
❑
Checkpoint - Verify that PowerPath sees all the paths to the LUNs with
the following PowerPath command:
powermt display dev=all class=clariion
If PowerPath does not see the LUNs
• Verify the server’s connection to the Storage Group.
• Verify that you registered your PowerPath license key if you have one.
• Verify that the storage-system properties are as defined in step 11.
PowerPath product
guide
15 Storage System
Set up Event
Monitor
❑
Plan your monitoring configuration.
Navisphere Manager
administrator’s guide
and online help
❑
Use Navisphere Manager to set user options, create templates, and set up
your monitoring configuration.
16 Server
Make LUNs
available to
NetWare
❑
Create partitions or the pertinent database file systems on the LUNs.
If NetWare does not recognize any LUNs, verify the connection to the
Storage Group.
Host connectivity guide
or NetWare
documentation
Task
With Access Logix Reference Document